Digital Construction Hub
Where data-rich models meet real analysis.
GEN-iX checks construction information from the first file name to the finished building: information requirements, COBie, model data, clash planning and survey scans, against the standards your industry already runs on.
Start free — 3 uploads, no card needed
7
modules live
3
workflows covered
2
free with an account
AI
on every module
One platform, the whole journey
From the first file name to the as-built scan.
Info Management
Set the rules for the information, then check what is delivered against them.
Model Quality & Coordination
Make sure the models carry the right data and are tested against each other.
Scan to BIM
Compare what was built with what was modelled.
The modulesBeta
Every tool, grouped by the job it does. Each card says what you put in, what you get back and the standard it checks against.
Info Management
Set the rules for the information, then check what is delivered against them.
NameForge
ISO 19650 file naming
Set your project's codes once, compose information container IDs field by field, and check names pasted from your CDE.
- In
- Your project codes
- Out
- Checked names and a code register
- To
- BS EN ISO 19650-2 UK NA
IDS
Information requirements
Write which elements must carry which properties, classifications and materials, with dropdowns for every IFC class and standard property set, and your own sets saved to your account.
- In
- Your requirements
- Out
- .ids file and an Excel summary
- To
- buildingSMART IDS 1.0
COBime
COBie validation
Upload a COBie workbook and get a full gap analysis against your information requirements, with a health score for every sheet.
- In
- COBie workbook
- Out
- Scored report and marked-up workbook
- To
- COBie 2.4 UK
IFCie
Model against COBie
Cross-check IFC models against the COBie that should describe them, and find assets in the model but missing from the data, and the reverse.
- In
- IFC models + COBie
- Out
- Match report and missing rows
- To
- IFC 2x3 / 4, COBie 2.4
Model Quality & Coordination
Make sure the models carry the right data and are tested against each other.
IFCheck
Model data audit
Score an IFC against your BEP on naming, classification, property sets, georeferencing and spatial structure, or against an IDS, and read back every value the file carries.
- In
- IFC models, optional IDS
- Out
- Scored audit, quantities, COBie
- To
- IFC 4, IDS 1.0
ClashMatrix
Clash test planning
Set which discipline is tested against which, at what tolerance and priority, and export the matrix and the test schedule for your BEP.
- In
- Disciplines and models
- Out
- Clash matrix and test schedule
- To
- ISO 19650 coordination
Scan to BIM
Compare what was built with what was modelled.
AI assistant · powered by Claude
Ask your results a question.
Most checking tools stop at a score and a list of errors. On GEN-iX you can ask what it means and what to do about it, and get an answer from your own data in seconds.
On every module
A side panel on COBime, IFCie, IFCheck, ClashMatrix, NameForge, IDS and SCANie, answering about what is on your screen.
Grounded in your own results
It reads your actual run: scores, findings, elements. It never invents a number, and says so when it cannot see something.
Explains, then points to the fix
What a figure means, why something failed, what to fix first, and in what order.
Help with the standards too
COBie, IFC, IDS, ISO 19650 naming and LOA tolerances, answered in plain English on the Assistant page.
Ask about this result
SCANie · Level 01 · LOA 30
Start with the north external wall. 41% of its points are within ±15 mm, its average deviation is 24 mm and it stands in front of the model face along its whole length, which points to the wall being set out about 25 mm out of line rather than a local bulge.
Next, column C2: average 38 mm, all points outside tolerance. A consistent offset like that usually means the column is out of position, not out of plumb.
Unlikely. The slabs and the other columns sit within 2 mm on average, and a registration error would shift everything together.
Built by BIM experts
Made by people who do this job.
GEN-iX is designed and built by practising BIM managers: people who write the BEPs, chase the COBie, run the coordination and sign off the handover. Every module started as a real problem on a real project, and was built to solve it properly, not to add a feature.
Problem first
We start from the job that costs a team days, and make it take minutes.
Intelligent where it counts
Exact checks against the standards, and an AI that explains the result in your own terms.
Honest about limits
Each tool says what it checks and what it does not, so nobody signs off on a false pass.
The problem behind each module
- 01
File names in the CDE that nobody can check against the naming standard.
NameForge→ - 02
Information requirements written in Word documents that no software can test.
IDS→ - 03
COBie handed over with gaps that surface months later, in operation.
COBime→ - 04
Models and their COBie describing two different buildings.
IFCie→ - 05
Model data audited by hand, one property set at a time.
IFCheck→ - 06
A clash test plan rebuilt from scratch for every BEP.
ClashMatrix→ - 07
As-built checks done by eye on a point cloud.
SCANie→
Why GEN-iX
Standardised. Accountable. Clear. Traceable.
What holds on every module, on every project, whoever on the team is reading the result.
Built on the standards you deliver to
Every check is written against a published standard: ISO 19650, COBie 2.4 UK, IFC, buildingSMART IDS and USIBD LOA, and against your own requirements on top.
One platform for the whole journey
Name the files, set the requirements, check the COBie, audit the models, plan the clashes and verify the build, all in one account rather than seven tools.
Results anyone on the project can read
Clear scores, charts and plain summaries a site manager, a project manager and a BIM manager all read the same way, with the detail there for whoever needs it.
An AI that explains, not just flags
Ask about any result on any module in plain English: what a figure means, what to fix first, why something failed. It answers from your own data and never invents numbers.
A record that survives the handover
Every run is kept against your account with its reports, so the evidence behind a decision is still there when the next team, or the client, asks for it.
Secure by design
Two-factor sign-in, files stored privately per account, downloads through short-lived links, and paid card details handled by Stripe, never by us.
A look inside · 01 / 08
Checked against the standards UK projects are delivered to.
Built for your standard
Need it checked against your own FM standard?
COBie isn’t the only way facilities data gets delivered. If your project runs on a different or bespoke FM standard, we can build a module around it — the same validation, scoring and reporting, shaped to your requirements. We have the team to do it.
Get started
Try GEN-iX on a real project.
Create an account, subscribe to a module, and run your first check today. No sales call required.